Zhou L., Zheng J., Lei Y., Yang Z., Liu P., Niu X., Wang W., Wu C., Zhang M., Yang C., Huang S., Tang F., He L., Long R., Xiong C.
Ключевые слова: rotating machines, HTS, YBCO, coils racetrack, insulationless, motors synchronous, flux pumps, excitation system, design, fabrication
Ключевые слова: HTS, REBCO, coated conductors, coils, impregnation, delamination, measurement technique, mechanical properties, stress distribution, experimental results
Ключевые слова: power equipment, SMES, review, cryogenic systems, hydrogen liquid, coils toroidal, coils D-shaped, design, HTS, REBCO, tapes, magnets, design parameters, ac losses, modeling, numerical analysis, 6.3.3.211.7.178
Ключевые слова: medical applications, proton irradiation, facility, magnets, canted-cosine-theta coils, design, gantry
Ключевые слова: HTS, YBCO, tapes, design parameters, overcurrent, test long-term operation, degradation studies, current decay, cycling, experimental results, modeling
Ключевые слова: conduction cooled systems, flux pumps, excitation system, design, measurement setup, HTS, YBCO, tapes, coils pancake, magnets
Ключевые слова: HTS, REBCO, tapes, coils, impregnation, cooling technology, temperature distribution, mechanical properties, thermal stress, delamination, critical current, degradation studies, measurement setup, current-voltage characteristics, transverse stress, thermal expansion, stress distribution, microstructure, experimental results
Ключевые слова: HTS, REBCO, coated conductors, coils pancake, insulationless, joints, joint resistances, thermal properties, numerical analysis, overcurrent, power losses, temperature rise
Ключевые слова: measurement technique, measurement setup, high field tests
Ключевые слова: flux pumps, motors, stators, HTS, YBCO, coils pancake, winding techniques, dc performance, design, fabrication, test results, charging characteristics
Ключевые слова: rotating machines, motors, flux pumps, HTS, YBCO, tapes, power transfer, wireless, design, fabrication, measurement setup
Zhou L., Zhu Y., Li H., Wang X., Lei Y., Yang Z., Yang Z., Zhang C., Wu C., Yang C., Wei J., Xu H., Long R., Xiong C., WeiWang
Ключевые слова: HTS, YBCO, coils, stacked blocks, magnets, quality control, excitation system, flux pumps, persistent current mode, numerical analysis, modeling
Ключевые слова: LHC, luminosity, magnets, cooling technology, helium gas, cryogenic systems, modeling, numerical analysis, temperature distribution
Ключевые слова: grid operation, FCL, HTS, YBCO, coated conductors, tapes, control systems, wind farms application, generators, modeling, numerical analysis
Ключевые слова: HTS, YBCO, tapes, design parameters, overcurrent, dc performance, cycling, measurement setup, resistance, critical caracteristics, critical current, degradation studies
Ключевые слова: rotating machines, condensers synchronous, power reactive, HTS, REBCO, coils, rotors, cryogenic systems, helium gas, cooling technology, fabrication, test results, prototype
Ключевые слова: HTS, YBCO, tapes, current, ac performance, vibration, n-value, critical current, degradation studies, experimental results
Zhang Y., Zhu Y., Li H., Liu X., Lei Y., Yang Z., Zhou Q., Wang W., Shen B., Zhai Y., Wang P., Wei J., Xu H., Ye H.
Ключевые слова: charging characteristics, HTS, YBCO, coated conductors, coils, flux pumps, control systems, dc performance, database
Ключевые слова: HTS, YBCO, thin films, substrate LaAlO3, chemical solution deposition, fabrication, multilayered structures, magnetron sputtering, protection layer Ag, protection layer Au, interfaces, critical caracteristics, critical current density, heat treatment, microstructure, Raman spectroscopy, experimental results
Ключевые слова: power equipment, FCL resistive, HTS, YBCO, coated conductors, hot spots, measurement technique, sensors, fibers, optical properties
Ключевые слова: HTS, YBCO, precursors, chemical solution deposition, fabrication, substrate LaAlO3, thin films, flux density, microstructure
Ключевые слова: magnets, cooling technology, cryogenic systems, interfaces, cryostat, heat transfer, thermal properties, experimental results
Ключевые слова: HTS, YBCO, coated conductors, laminations, critical caracteristics, oxygenation treatments, MOD process, critical caracteristics, critical current distribution, magnetic field distribution, current-voltage characteristics, microstructure, composition, X-ray diffraction, joints superconducting
Ключевые слова: HTS, YBCO, bulk, levitation performance, dynamic operation, modeling, numerical analysis, displacements
Ключевые слова: HTS, reactor, modeling, numerical analysis, impedance, prototype, design parameters, test results, REBCO, new
Liu B., Jin H., Wu Y., Liu S., Long F., Liu F., Jin J., Wang K., Su C., Qin J.-G., Liu H.-J., Yang Z.-Y., Pang Y.-C., Wei Z.-R., Xue T.-J., Li H.-W., Niu E.-W.
Ключевые слова: China, ITER, status, fabrication, coils toroidal, coils poloidal field, central coils, LTS, NbTi, Nb3Sn, cable-in-conduit conductor, critical caracteristics, jacketing, mechanical properties, composition
Lin Q.X., Deng Z.G., Jiang D.H., Wang W.J., Shin D.I., Xie Z.G., Gu X., Lin N., Shao M.L., Yang Z.G., Shin K.S.
Ключевые слова: bearing magnetic, HTS, bulk, stators, magnets permanent, rotors, mechanical properties, stiffness, experimental results, numerical analysis
Ключевые слова: HTS, YBCO, doping effect, thin films, TFA-MOD process, critical caracteristics, critical current density, fabrication, pinning, microstructure, Jc/B curves, pinning force
Ключевые слова: HTS, YBCO, films, substrate SrTiO3, composition, phase composition, REBCO, buffer layers, coated conductors, fabrication, interaction
Li X., Wang H., Zhao B., Yan L., Chen S., Lei Y., Yang Z., Wang Q., Dai Y., Song S., Wang C., Cao Z., Hu X., Zhang H., Liu J., Xu G., Liu H., Zhang Q., Cheng J., Zhao S.
Ключевые слова: power equipment, SMES, LTG process, NbTi, fabrication, test results, current leads, HTS, Bi2223, coils solenoidal, design parameters, quench protection
Ключевые слова: LTS, cable-in-conduit conductor, modeling, quench, numerical analysis, quench propagation
Ключевые слова: Tokamak, coils poloidal field, numerical analysis, core iron, high field magnets
Ключевые слова: cryostat, design, magnets, hybrid systems
Rupich M.W., Zhang W., Feenstra R., Wong-Ng W., Levin I., Yang Z., Otani M., Cook L., Liu G., Schenck P.
Ключевые слова: HTS, YBCO, coated conductors, fabrication, phase composition, phase diagram, RABITS process, substrate SrTiO3
Gu H.W., Yang J., Wang L., Zhang L., Kim J.H., Song W.H., Zhu X.B., Sun Y.P., Dou S.X., Shi D.Q., Zeng R., Lei H.C., Yang Z.R.
Ключевые слова: HTS, YBCO, coated conductors, buffer layers, seed layers, thickness dependence, composition, chemical solution deposition, fabrication, MOD process, microstructure
Cook L.P., Wong-Ng W.(winnie.wong-ng@nist.gov), Yang Z., Huang Q., Kaduk J.A., Frank J.
Ключевые слова: HTS, YBCO, buffer layers, phase composition, phase formation, coated conductors, interaction
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.